Re: wiring 12 volt

Posted by Bob M - w/diagram for solenoid-operated starter on August 27, 2000 at 11:48:25 from (205.188.197.164):

In Reply to: wiring 12 volt posted by joe sershen on August 27, 2000 at 08:15:56:

Joe - Here's a diagram that will work for your 450. The aux terminals on your solenoid may be marked differently depending on the mfr, but this should get you going.

Note - the wire running between the "I" terminal on the solenoid and the coil is optional. It bypasses the ignition resistor to feed full battery voltage while cranking. If your tractor starts OK without it, simply leave this wire off.

Bob M

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: wiring 12 volt Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]