Re: M starter problem

Posted by T_Bone on September 05, 2000 at 21:43:35 from (207.254.53.75):

In Reply to: M starter problem posted by todd on September 05, 2000 at 21:03:32:

I'll assume you cleaned the battery cables and posts really good. If the ampmeter discharges real hard then you probably have bad bearing or a burned out field coil but more likely it's bearings. Bearings ware out letting the armature short out or bind on the field coil. Could be a bad solenoid coil too. With out a vom or a test light, it's pretty much guess work or being a parts replacer to see what wrong and thats not a good way to diagnose problems. It could also be bad wiring of not being able to handle the current. If the battery cable to the starter looks bad, replace it as it could be corroded back into the insulation.
Hope this helps as it hard to teach a electrical class in one paragraph.

T_Bone

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M starter problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]