As a point of providing correct information, the H-10-H picker at the Smithsonian is serial number 525 or the 25th machine built and sold by IH. It was sold in California, a 1943 model and one of the last H-10-H pickers made. H-10-H sn# 501 was built in 1941 and sold to Hopson Plantation, Clarksdale, MS in 1942. In 1946 after the harvest was complete Hopson sold the picker without tractor to John Deere. After John Deere reverse engineered for their picker, including using the cast top for a mold for the JD #1 and #8 row units, H-10-H sn# 501 was scrapped. #'s H-10-H produced by year were 12 in 1942 and 16 in 1943. These numbers include as many as 3 engineering machines that were later re numbered and sold, so there is some confusion as to the exact number of machines of that model that existed. The number would be between 25 and 28 total. IH produced one M-10-H in 1943 and 40 in 1944, all on M tractors. No pickers were produced in 1945. In 1946, 65 model M-11-H pickers on M tractors were produced. The M-12-H picker actually began in 1947 with about 175 pickers being produced that year in Memphis.
The mechanical spindle type cotton picker development goes back to as early as 1850. Angus Campbell patented his first picker in 1889 and had 10 units in the field in 1910. IH bought his patents in 1924 and had plans and began to collect parts to produce a commercial run in 1929. These would have been similar to Campbell's machine except mounted on tractors and some improvements including a spindle water flush system (not continuous moistening)to remove plant gums from the spindles. There were at least five different inventors from 1880 until 1920 that worked on a spindle type harvester and received patents, all located in the Central Texas area.
During the 1930's, IH engineers recognized the need for cleaning and drying machinery in the gin in order to get the best lint quality possible. This was generally recognized as one color grade and trash level lower than hand picked cotton. Gins were quick to add machinery after WWII to handle machine picked cotton, as pickers were introduced.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
