Posted by RPM1941 on January 18, 2012 at 15:34:54 from (173.24.196.59):
In Reply to: changing Disc blades posted by brokengun on January 18, 2012 at 09:38:16:
I have put these bruisers together new back in the 60s, you assemble the frame on wheels, you put the disc gangs, brngs to the angle bars, lift them with a loader or fork lift attaching them to main frame. The biggest item was getting the disc gangs tight, you had to torque the arbor bolts so that it actually stretched the arbor bolts, this kept them from loosening in heavy tillage. IH made a 1-11/16 box wrench, it had a stub you put a cheater pipe, 6' and all a 200lb guy could do, while a 36" pipe wrench held the spools from turning. Also bang on end of head of arbor bolt while you tighten. I was in my 20s & weeks of this wore me down. They were shipped by IH completely knocked down.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
