Posted by AG in IN on February 26, 2012 at 05:45:15 from (67.236.99.214):
In Reply to: 504 Panel bolts posted by Wardner on February 25, 2012 at 19:02:06:
Jason Hubner said: (quoted from post at 04:02:06 02/26/12) I'm hoping one of you guys with a 504 could help me out. My 504 is missing all the bolts that fastens the instrument panel to the sheet metal. I've looked in the parts book, but can't find them. Could one of you guys give me the dimensions for them so i can get some. length, size, tpi? Thanks.
Parts book shows using 10 of part number 369 916 R2 screws. They're still available from CIH, and should be around $5.50 each at a local dealer. It doesn't state the dimensions or thread size.
You should be able to find a suitable substitution locally and get all 10 or a couple of dozen for that price.
AG
This post was edited by AG in IN at 06:35:42 02/26/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
