Posted by 61-4010 on March 10, 2012 at 06:45:26 from (98.26.231.32):
I feel stupid asking this....but I"m frustrated and need guidance.
It"s been a LONGGGGG time since I removed the front end suitcase style weights on my 1466. The weights hang over the bracket on the front of the tractor and have a small "nipple" (did I say that!) on the weight that goes into the bracket. There are no bolts holding the weights in place nor any braces such as noted in the manual. Bottom line, they are not secured.
I must not be holding my mouth right because for the life of me, I cannot seem to pull the weights up and off. You have to angle the weights enough for the nipple to clear the hole in the bracket but I"ll be darned if I can get enough angle for the bottom lip of the weight to clear the bracket when pulling up.
So if you have any ideas to help this simpleton, please let me know.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
