Re: Help...How to Attach Single Bottom Plow to Super AV

Posted by Haas on September 18, 2000 at 18:39:12 from (129.37.117.99):

In Reply to: Help...How to Attach Single Bottom Plow to Super AV posted by Phil on September 18, 2000 at 17:22:58:

Well, I've used a plow like that on a Super A and turning the drawbar around is what you do. The AV must be different. To make the plow dig in on the first furrow, you need to lower the drawbar down so the plow "rides on the point". If all the parts are there (which they usually are not) at least some plows had an adjustment for this to raise and lower the drawbar. There is also a bolt in the spring hitch of the plow you can rotate to tilt the plow side to side. You neet to set that for normal plowing and use the drawbar up and down to get started.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Help...How to Attach Single Bottom Plow to Super AV Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]