Posted by PADeutzGuy on April 16, 2012 at 17:25:50 from (174.140.69.223):
Putting my Super C back together today... I replaced the fan as it's bearings weren't so great, cleaned radiator, rebuilt generator and starter, etc. I see the old fan had some big washers to built it out from the neck. The new fan was from a very experienced dealer, for a 123 engine with a water pump. It hits the water pump pulley with out the spacer washers. Not the two thin ones that come with the kit, I'm talking ones about 1/8 inch x2. This isn't normal I'm assuming? Now the generator belt just barely missed the water pump pully.
I just got this tractor last year and ran it as it was, strictly a cultivator with dressers for my sweet corn, it doesn't work 3 hours a year. The tool box was gone when I got it, so I have no idea of it's serial number. Most all of it's parts have an R in the part number somewhere. I look that up and it says 1948, but there was no Super's back then, right?
Could this fan bracket/gooseneck be from a C, and that's why it doesn't fit right??
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
