Re: M 12 volt with mag ?

Posted by Bob M - w/diagram on September 23, 2000 at 04:51:21 from (172.166.23.73):

In Reply to: M 12 volt with mag ? posted by todd on September 22, 2000 at 19:41:42:

Todd - A mag works independent of the charging system - i.e. it doesn't care whether it's 6 or 12 volts. But because the ignition switch on a magneto system OPENS in the "run" position (vs. CLOSES to run w/ battery ignition), you'll need to replace the switch.

One way is to replace the switch with a double pole double throw (DPDT) toggle switch (a few $ at Radio Shack) then wire it up per above.

Hope this helps...

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M 12 volt with mag ? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]