Posted by Farmall450lpg on June 07, 2012 at 12:08:36 from (166.147.89.159):
I am new to this forum and new to the tractor restoration hobby. I have farmall 450 lpg and i am having some clutch problems. When i bought the tractor it didnt run and after a while i got it running and it ran fine. Then i figured out that it needed a new clutch and pressure plate. So iwent onto ebay and bought a replacement clutch and pressure plate. I then split the tractor and put the new clutch in. I followed all the steps and put it back together and when i went to start it it started fine but after about 5 minutes running it started shooting out white smoke from the crankcase breather. I checked the oil which was at the correct level. Even after i put the new clutch in, it still doesnt seem to work. I adjusted the clutch forks but still no luck. If somebody could help me out and tell me how to fix the engine from smoking and help me get the clutch working properly.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
