Posted by tempola on June 18, 2012 at 11:33:38 from (72.161.223.225):
I originally built this for a puller, but since I have bought a place, I find it very handy. With the 24"s as expected, it's geared a bit slow, but 1st gear is perfect for tobacco planting or tilling.
This tractor sits 10" lower than a Row crop C. It was built from a 2404, and a 1949 C.
With the 135 engine...it has plenty of power, and has turned out to be the handiest tractor I have ever had....I plan to reinstall the hydraulics and add a 3 point. I also plan to install a 504 manifold, so I can reroute the exhaust under the tractor....hopefully I can also find a belly mower for it.
FYI.....2404 & 240 utility rear axles and housings will bolt right on a C or super C....if you want to convert to steel 8 lug rear wheels.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
