Posted by Doug Kirk on July 29, 2012 at 14:51:06 from (209.102.248.72):
I have a 1953 Super H that runs rough, I just bought it and I thought all it needed was a carburator rebuild, I have put a complete kit in it and Istill can't get it to smoothout, here is a list of stuff that I have already done, plugs, points, condensor, rebuilt carb, took carb off 5 or 6 times and reset float, set valve clearances. Plugs are Champion. cleaedthe gas tank also. When I shut the engine off gas pours out of the carb for a little bit. Also if I coles the fuel ajustment most of the way it will smooth out, but then it can't get enough gas if you slow the engine down and speed it back up. Ihave checked the compression and it is 75 on all 4 cylinders cold. Any help sure would be nice I am at my witts end.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
