Posted by Ben Beyer on July 30, 2012 at 17:45:47 from (97.79.194.66):
This message is a reply to an archived post by Ben Beyer on October 01, 2011 at 14:28:25. The original subject was "Farmall Single Row Cotton Picker Advice".
Ok guys, new year, new problem.
We had the head of our 114A rebuilt and it's working great. Now, the sprockets in the gear box that run the fan have stripped out. We had one of the sprockets custom made a few years ago since it was in such bad shape. The woodruff key had eaten away the slot for the fan pulley.
The custom made sprocket was sought out by my predecessor and in hindsight, we should've had both sprockets made. The original one in the gear box and pretty worn out and chewed the custom made one up.
Any idea of where we could get these parts?
I've called Hlavinka"s equipment in Taft, TX (who also rebuilt the head) and they have a guy that might have the part. But might isn't good enough and we need some parts.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
