Re: IH 311 plow, cleaning up moldboards

Posted by rhtx55 on October 21, 2012 at 19:08:15 from (68.185.207.25):

In Reply to: IH 311 plow, cleaning up moldboards posted by Matt (NEIA) on October 20, 2012 at 16:17:38:

I would put some oil based "plow Paint" (almost like grease) on it for now.

When you get a chance, take it to the first plow day you can find in your area, for the first few rounds run it about 4 inches deep, and in as high a gear as you tractor will pull it, it will shine up pretty quickly. You may need to stop & scrape the accumulated dirt off every round or so, but once you get it all shined up, it will pull at regular depth much easier.

You can sand & grind on it all you want, but it will clean up much better and easier by simply using it.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]