Posted by outdoors on October 29, 2012 at 19:47:38 from (142.134.68.213):
Looking at a late model IH 684 with 2500 hrs and the H shift pattern. Tractor seems to work well however it has a Laurin cab and I'm surprised how noisey and hot it is inside when operating. Is that just the way it is or can they be lined to lower the noise level? Are cab parts still available? The cab is not rusty, just needs a little attention to a few hinges and replace one cracked, lower glass.
The 684 really ran well for a couple hours today mowing some significant bushes and is a great match for my Bush Hog 296. Seems like it would play with my 3 furrow plough and 10 foot disk. I like the tractor but not sure about the cab. Could always sell the cab I suppose and go open station. I see some people remove the doors for summer work but would that reduce the noise resonance inside the cab?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
