Farmall & IHC Tractors Discussion Board |
How Do I Read a Painted-Over Serial Number?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mark W. on October 30, 2000 at 19:44:41 from (209.176.193.183):
I'm trying to find out what the tractor serial number is for my 300 Utility. Unfortunately, some "gentleman" painted over the tag at some point in time. The paint is thick enough that I can't make out any part of what may be underneath it. First, the easy solution: The engine serial number is 23999. Did IH publish a list that indicated which tractor serial number went with which engine serial number? If not, the harder solution: Was the tractor serial number stamped or engraved, or merely painted on? I'm thinking of going at it slowly with a rag soaked in some solvent such as lacquer thinner. A stamped or engraved number should show up pretty well, and even a painted number may be legible. Of course, it will likely destroy any non-engraved markings on the tag. That brings me to my final question: Where can I get a reproduction tag? Thanks in advance for any help/advice. Mark W.
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|