Re: Finally put the 300 back to work

Posted by Janicholson on February 23, 2013 at 05:50:44 from (74.60.94.18):

In Reply to: Finally put the 300 back to work posted by Zachary Hoyt on February 22, 2013 at 19:12:21:

All straight cut gears (bevel and spurr) make noise. There are some very expensive gears used to drive helicopter rotors that are computer profiled. they still make noise. The purpose is to gain reliability in a single point failure location. (having the rotor stop is not good) The straight cut gear is still one of the highest efficiency power transfer available.
It will be OK in my opinion. Jim

Replies:

• Re: Finally put the 300 back to work Zachary Hoyt 10:45:20 02/23/13 (0)
• Re: Finally put the 300 back to work rankrank1 09:45:02 02/23/13 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]