Posted by FBH44 on March 23, 2013 at 17:12:41 from (64.85.214.227):
In Reply to: SH wont fire posted by IAtractorKid on March 22, 2013 at 17:15:48:
Three things come to mind, that Ihave found on my H; Carb float ... the inside of the float chamber is tight, right up agianst the float, and soemtimes the float rubs slightly and sticks. Try a Dremel, and smooth out the ID of the chamber. Sediment Bowl .... it can look perfect, but sometimes pieces of crub can stick in the tight inside passage of that bowl inlet. I had that happen. On mine, what you would think was a direct opening was not, it turned and twisted, and got plugged up. Points ..... I thought I had set them perfect, but I cannot set points. I had mine set about 1/4". My brother re-set mine, and she fired right up!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
