Re: H QUESTIONS

Posted by The Red on November 16, 2000 at 14:52:57 from (12.75.198.111):

In Reply to: H QUESTIONS posted by Ben on November 16, 2000 at 14:34:42:

Ben I would suggest .020 for cold since you have a fresh engine. Those valves will be seating over the next 20 hours or so. I recommend you re-torque the head bolts after the second hour or so. Since you will have the rocker arm assembly off, that is when I reset the clearances to .018.

Open up the bottom jet about 3 full turns and see if that gets you going.

Follow Ups:

• Re: Re: H QUESTIONS keith 20:31:38 11/17/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: H QUESTIONS Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]