Re: farmall 504 2/16 pull plow

Posted by mkirsch on April 29, 2013 at 05:15:05 from (64.80.110.74):

In Reply to: farmall 504 2/16 pull plow posted by twomanycases on April 28, 2013 at 05:42:01:

Yes, it's not that crucial when it's only a 2-bottom plow on a tractor the size of a 504.

To get it all centered up, I think you'd need to have like 18" from the center of the tractor to the inside of the furrow wheel. That'd be 16" for 1/2 the total width of the plow, plus 2" of clearance on the furrow wall.

I don't think you'd set it that narrow even for "real" plowing.

Just adjust the drawbar on the plow so that the front bottom takes a full cut.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]