Re: Throttle On H Slips to Idle

Posted by Pete in PA on November 21, 2000 at 09:50:45 from (134.192.209.158):

In Reply to: Throttle On H Slips to Idle posted by Bob R on November 21, 2000 at 07:13:51:

Hey...

I had that same problem on my "H" - I had the saw
tooth style throttle, and my throttle lever had
become so worn that the flat metal part that
engaged with the sawteeth was worn completely
through. I temporarily fixed the problem with a
thin piece of sheet metal wrapped around the
throttle lever and sticking up into the sawteeth,
then took it apart and dropped a bead of weld on
the worn down area to build it up, filed it to a
point repainted and reinstalled...

works like a champ and looks like new

Pete

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Throttle On H Slips to Idle Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]