oldiron29, sorry I missed you as well. Believe it or not, that is the Tractor Supply Majic IH red. Rattle can. I was skeptical a month or two back, but thought, what the heck, I'll try some of it. I painted a couple of things that needed to be RED, just to try it out.
Well, I was impressed. The spray nozzle puts out what is almost a profession fan spray, and holding about 6" - 8" away, and using a normal 1/3 overlap, I have been VERY pleased with the results.
On the tank, I took it down to bare metal. Hit it with an acid etch primer. Then did a light color coat, 10 mins flash time, and then a heavier "gloss" coat. You see the result.
I cannot comment on the durability, but so far, I am pleased with the color/hue, and the quality of the finish. time of course will tell. I am not setup to shoot urethane, so I go with the alkyd paints. Rattle cans for small jobs, and paint gun for larger ones.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
