Posted by Pete76NY on August 24, 2013 at 08:09:00 from (74.212.60.163):
Pull is on Sunday this year, Weigh n pay begins @ 9AM, 1st hook @ 10AM. 2 Divisions: Stock and Modified, weight classes 3500, 4000, 4500, 5000, 5500, 6000, 6500, 7500, 8000, 8500, 9000 all with 200lb driver allowance. Stock Division means stock: NATPA Division 1 rules including tire size and RPM chart (tach will be in use at tech), only modifications allowed are direct replacement chrome or SS mufflers, drawbars for height (19") only (must still pull from original attachment point to tractor and be 24" behind rear axle), and hanging weights will be allowed in Stock Division this year, 1st or 2nd gear only, no Torque Amplification devices can be shifted in this class. Everyone else is Modified; yes even electronic ignitions count! 21" drawbar height, 1st or 2nd gear, everything else goes! Dave: (607) 625-4185 Pete: (607) 760-8966 Darwin: (607)-0333 All tractors to be pre 1960 or part of a production run that began prior to 1960, Our passion is Antique tractor pulling, our Emphasis is STOCK Antique tracor pulling!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
