|
Farmall & IHC Tractors Discussion Board |
Stuck in gear!!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bama Binder on December 01, 2000 at 13:30:36 from (206.5.110.200):
Ok guys...bail me out here. My Super H gets stuck in one gear every once in a while. The first time it happened I think it may have been stuck in 2 gears. The shifter would move easily, but it wouldn't alter the configuration of things in the gearbox. I finally got is sorted out by moving the shifter through all the gears and moving the shifter quickly. There seems to be more "play" in the shift lever than there should be, but I don't have anything to compare it to except my Cub and a JD 4020. Anyway, sifting through the old posts, I come up with possibly a bent shifter fork...but what else?? I'm sure the gear oil hasn't been changed in a long while, so I have 6 gallons ready to go in when I have the chance to change it. Could that be a contribting factor? Come on guys...give me your best guess...I really don't want to take the tranny cover off yet...thanks...BB
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
