Re: Will not start

Posted by Bill {Antique Acres} on December 06, 2000 at 12:58:13 from (63.162.254.52):

In Reply to: Will not start posted by Bill Jolley on December 06, 2000 at 11:10:49:

A few things come to mind. First are you sure your cap is good? Second are you running on 6 volts or 12 volts and using a resistor? If using a resistor unhook it and see if that makes a difference. I would lay my money on you have a bad condensor though. Although it may be new dosen't mean it works. With your points closed and the switch on, with a screwdriver open and close them and see if you get a good spark jumping across. If so it might be your cap. Make sure the button in the cap on the bottom of the coil wire post is good. I had that BB looking thing come out on mine and it drove me nuts until I looked at the obvious and found it. Let us know what you find. I am sure others will have better advice, but this may be somewhere to start. Bill {Antique Acres}

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Will not start Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]