A question about the hand crank on an F-20

Posted by Mike Dau on November 13, 2013 at 17:50:33 from (173.29.226.242):

I've noticed while getting my F-20 cleaned up that there's a small diameter hole drilled through the hand start shaft that sticks out of the bolster, and a matching hole in the mating end of the hand crank. I'm assuming this means I can put a kotter pin in and leave the hand crank hanging there all the time. My question is... is there a reason I shouldn't?

Replies:

• Re: A question about the hand crank on an F-20 James Williams 21:49:30 11/13/13 (0)
• Re: A question about the hand crank on an F-20 robgIN 18:15:55 11/13/13 (1)
  • Re: A question about the hand crank on an F-20 Old-F20 20:33:17 11/13/13 (0)
• Re: A question about the hand crank on an F-20 DeltaRed 17:56:44 11/13/13 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]