Re: Cilinderhead gasket 10-20 gear drive

Posted by T_Bone on December 13, 2000 at 20:28:12 from (207.254.53.114):

In Reply to: Cilinderhead gasket 10-20 gear drive posted by Klein Rot on December 13, 2000 at 11:46:21:

Hi Klein, If you can't find one, make one from copper yourself or if you have an old one, I have used JB Weld mixed on the soft side in a 4cyl diesel that held for 25k miles or 450hrs before it let go again. Come to find out the people I bought the head from, milled it and the compression was 630psi rather than the 485psi spec so I once again am going to use JB Weld to fix it.

T_Bone

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Cilinderhead gasket 10-20 gear drive Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]