The outlets on the left and right are both on the same circuit. I removed the couplers from the left side manifold block and hard-plumbed the remote outlet hoses into those ports. This is how the remotes and the boom lift cylinders ended up on the same circuit.
Here is a picture of the brackets that I had to make to adapt the 460 brackets that came with the loader onto my tractor. The frame of the 350 is two inches narrower and the hole pattern in the front casting where the brackets bolt on is completely different. I ran the new brackets back far enough to tie into both the casting and the side frame rails to help tie everything together. Since you're going from an H to a 300 your system would be different since you won't have the white angles shown here; they were specific to the 460. I think the brackets made for the H to 350 family were one piece and had a joggle to get them out to the width of the loader frame.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
