Re: Help! M does not run smooth

Posted by wayne in mn on June 13, 2014 at 10:54:35 from (66.188.174.211):

In Reply to: Help! M does not run smooth posted by Jim Stordahl on June 13, 2014 at 08:26:05:

I had an H with similar issues; thought the valves were needing attention. However, when removing the manifold to take off the cylinder head, one intake runner fell to the floor. It had completely broken off and until the engine was warm the issue did not show up.
Use a propane torch (not burning) and flow the gas around the manifold area when the engine is acting up as you described. JB-80 or other similar combustible gaseous product will work also.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]