Farmall & IHC Tractors Discussion Board |
Re: Re: Oil Leak on 42H
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by F20II :o) Red I wonder on December 31, 2000 at 18:36:41 from (207.202.176.158):
In Reply to: Re: Oil Leak on 42H posted by The Red on December 31, 2000 at 13:52:09:

If he means the plate that is attached to the head and is right close to the intake manifold on the left side. Do not have a good picture of that bracket/lever but in the picture you can see it peeking out behind the exhaust pipe. A throttle rod then comes down to the carb which in this picture is not hooked up yet. Is this what he is talking about I wonder, if so then there could be a bad manifold gasket which would mean it is sucking air and when he puts the rag near it he plugs it up. Hummmmmmmmmm scratching bald head as well :o(
Follow Ups:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|