Posted by WellWorn on September 23, 2014 at 22:26:10 from (75.213.147.204):
In Reply to: Distributor dilemma posted by WellWorn on September 22, 2014 at 21:37:00:
Thanks for the very helpful and informative replies, gentlemen.
Our internet connection is only slightly faster than molasses, so images are tough, but I checked here: http://www.external_link/IH-Farmall-Distributors
and the top picture shows what looks to be my distributor, other than the lack of part# on the casting. It shows a similar screw in the side and 'weep hole' on the stem at about 1 o'clock (from the clip at 12 in the picture). I'm still missing my TC39, so part lookup is difficult, but the in the light of day I see the inner dust shield has an IH 353900R1 on it, which along with DSlater's distrib coding info gives absolute certainty.
As for it outlasting me, I rather doubt it unless I don't make it through the rest of the month (which is possible, but unexpected). The shaft shows ~.016 wiggle measured on the cam block, both side to side and top to bottom, so it needs to be rebuilt, but that will have to wait until either it isn't needed daily, or I have a spare distributor to work with. The later may be coming, as I have a line on a mostly complete but 'stuck' A for parts (or project) - just have to make the time to go pick it up (and space in the shop to work on something else).
Mr Slater, I corrected and completed the serial numbers in the first post, and while closer than the original guestimates, the engine is still "older" than the tractor by at least 18,566 units, unless the left seat bracket was replaced, and that is even less likely.
I have absolutely no history with this tractor - an elder cousin got it probably 10 years ago from a deadbeat as collateral/payment for some money he loaned. No idea who as he didn't want to talk about it. He was going to give it to me about 6 years ago, but I paid him for it (more than it was worth, but I'm quite certain less than he had loaned). Cousin died 2 years ago at age 90. It is what it is.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.