Farmall & IHC Tractors Discussion Board |
strange Farmall Ms
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Duane P on January 04, 2001 at 00:15:20 from (209.240.221.118):
Have 3 Farmall M questions. Most of my Ms have a small x stamped on the serial number plate after the serial number anybody know why? A neighbor has a MD that the plate where the lower front bolster bolts on is smaller and only fits an H lower bolster. The upper bolster shaft for an H is too short to fit in the M housing. The upper shaft is like an H only too long to fit an H. Also it has one long and one short rear axle. Any ideas? Lastly a friend has a M that his dad bought new in 1952 and has the correct serial number for a 52. It appears to be no different than any other M but on the tag where it is supposed to read Model M it reads Model IX6 He says that it is the original tag but always wondered why it reads IX6? Anybody have any help?
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|