Re: Re: Re: Model Identification

Posted by JIm Becker on January 10, 2001 at 16:28:37 from (209.30.248.155):

In Reply to: Re: Re: Model Identification posted by Bruce Banning on January 10, 2001 at 15:48:14:

I believe 251069R1 is the part number for the engine block of a Super A or C. If 1015R is a date code, it is Oct 15, 1948. Farmall C engine numbers start with FCM, so you probably have an engine out of a C (which would bolt right into a BN). If the rest is a BN, there should be separate final drive housings out by the front (24") wheels. These should each be connected to the central transmission/differential housings by an axle housing. These axle housings should each be 18" long. If they are 22" it is a B rather than a BN.

These all came from the factory with a narrow front end. SO if yours has a wide "rear" axle, it also came from something else.

Follow Ups:

• Re: Re: Re: Re: Model Identification Bruce Banning 15:30:50 01/14/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Model Identification Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]