Posted by gene bender on January 09, 2015 at 18:50:49 from (67.55.226.121):
In Reply to: meters Gages posted by William Eccles - Jardine on January 09, 2015 at 16:13:48:
Unless you can hook the guage to the top of the head or on the neck going to he head you will not get a reading now if you have shutters and they work hooking to the lower outlet and with them closed you wont get any reading but just hooking into the return out of the block the temp will not get hiogh enough to read anything. The purpose of the guage was for the distillate engines that started on gas with shutters closed till temp got up enough for the distillate to burn then you would open the shutters but the guage would go back again to nothing. But hooking the sender to the top of the engine you can get a reading. Basicly the guage is just for pretty on the gas engine. You can get guages with a long tube to kmount wehere you like on the steering post.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
