Re: farmall M help building BIG motor !

Posted by boot on February 09, 2015 at 11:01:15 from (73.29.73.53):

In Reply to: farmall M help building BIG motor ! posted by boot on February 09, 2015 at 10:38:06:

Thanks everyone ! This is a great start. The tractor has to look 100% stock it goes to a lot of shows. We just want it to run better !!! :twisted: maybe pull something. No turbos, blowers or nitrous , yet...

Want to go big but don't want to snap the crank or the block. Talked to Denny's , 350 cubes with their pistons,rings, sleeves, pins. $599. But iIl have to stroke our crank to 6" from 5.25 ! That sounds shakey .

Also put in an email to m&w. That's the one in Australia ? See what they say. If its the right one....

Thanks again. With your help, this might actually work !

Joe

Replies:

• Re: farmall M help building BIG motor ! John M 15:59:15 02/09/15 (0)
• Re: farmall M help building BIG motor ! rustyfarmall 12:02:14 02/09/15 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]