Re: Wide front for Farmall B?

Posted by Haas on January 25, 2001 at 06:57:05 from (129.37.117.107):

In Reply to: Wide front for Farmall B? posted by Dave on January 25, 2001 at 06:38:26:

I looked at a B a while back that had a wide front. It was either off an A or a Super A. I think either would work. You have to modify it because it is not wide enough on the left hand side. This person had done so, so that the tread matched on that side. I don't recall the details of how it was done, but don't think it would be that difficult. I believe he just welded and extension on the axle. One problem was that the sheet metal does not fit back very good. The grill must be cut to accomodate the steering gear and apparently the radiator sets out a little further because on the one I looked at, the hood was too short.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Wide front for Farmall B? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]