Posted by soundguy on June 07, 2011 at 16:47:28 from (184.212.103.166):
In Reply to: Re: oil using Ford posted by The Dukester on June 07, 2011 at 14:54:56:
my 98 dodge ram 1500 with 5.9 gasser uses -0- oil on a 3500mile change using walmart 10w30
my 04 f250 with 6.0 PSD uses -0- oil on a 5k change using motorcraft 15w40
my 99 f450 with 7.3 psd uses -0- oil on (variable, but over 5k ) change using 5w40 valvoline ultra blue ful synthetic.
heck.. virtually all 50-60 my old ford, allis and jd and IH gasser and diesel tractors using walmart oil use no oil per year.
my 2000 gmc yukon uses about a quart per 1500 miles :( dealer says it's normal. oil is 5w20, though I usually go to 5w30 and bump that usage to 1 quart per 2000m at the 3000 mark for chage it's usually down a quart more... :( won't ever own another gm if I can help it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
