Posted by bill from scotland on July 14, 2011 at 15:54:20 from (98.127.6.140):
Flew into Calgary on Sunday evening, drove down into Montana through the Sun Road, absolutely fantastic. Spent today in Great Falls and off to Gardiner and Yellowstone tommorow befor going across to Cody and Rapid City. Managed to order up some new piston rings for my Massey 97 from Auto Machine in Great Falls, got a real helpfull guy called Brent. Tried to get a hydrualic filter for my MF 1155 and head gasket for my JD 5020 but no luck. Might get a filter at a place near Saskatoon but the only head gasket is away up past Banff. Hope to leave Rapid City and travel up the Dakotas on our way to Manitoba. I hope to find Pete's place but wondered if there are any other tractor salvage yards on my way up there. Keep thinking you guys have a great country here and everyone friendly and helpful. Forgot to say just before we reached Great Fall we passed through a hail storm, huge pieces of frozen snow so the hire car has lots of dings on the hood and roof, dont know what the hire company will say about that! Bill
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
