Posted by kaferhaus on August 11, 2011 at 14:17:19 from (68.35.199.84):
In Reply to: OT- Chinese Quality posted by JMS/.MN on August 10, 2011 at 22:28:31:
the Chinese are perfectly capable of turning out very high quality products and do when high quality is specified by the buyer.
The issue is the american companies importing this crap are having it made to a specific price point to move product quickly.
the Chinese also manufacture machine tools. One example is a 12x36 metal lathe. You can buy that lathe for between 1700 and 4500 bucks.
By that I mean they look like the same exact lathe until you look closely or open them up. The castings are indeed pretty much identical but the precision of the components that matter vary wildly.
I and a friend have identical looking lathes. Mine will hold a cut to .0002" and his won't come close to that. The runout on my spindle is .000025 his is .0005. My machine makes about half as much noise running as his does.
I could go on and on about the subtle but meaningful differences.
I paid 4500 for mine he got his for around 2200
The vendor who imports the lathe I bought has much stricter mfg standards than his does.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
