Posted by farmallhal on August 19, 2011 at 18:48:47 from (71.49.69.219):
I'm expanding my tractor work area to include a heated and cooled working area and plan to cover the walls with OSB (Ox Board, Oriented Strand Board, Chip Board). This is the material commonly used these days in lieu of plywood which is mostly imported from Canada. One side is slick with what appears to be a resin while the other side seems to be more of a natural wood which is much rougher. This is the material which seems to be made from wood chips and glue or a resin. It has several different names depending on the local area. I am wanting to paint the interior after this material is placed on the walls and before adding additional features like shelves, cabinets, etc. Has anyone painted this material before and which side is best to be painted? Any help would be most appreciated as I want to install the material with the correct side out to be painted. Thanks for any and all your comments, Hal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
