Need to double check- but IHC 4 and 6 row narrow cultivators for M to 400 series and for 560 row crops had a manual available for use on Olivers and Case row crops. JD had a utility cultivator- not the quick mount- that was noted to fit AC, Oliver, Case and IHC rowcrops in 2, 4 and 6 row, with a 8 row "vegetable" model avaliable. Point was the adapter manuals were fairly good about the adapter plates and bolts needed. A JD 6 row meant for 60/70, 620/630 and the 4020 might be quick adaptable for your Ollie and be "right" color. JD had the implement division making many "utility" products meant to be usable by other than JD- the corn picker model 227 with the PTO drive could be used on IHC M that didn"t have the belt pulley needed for the IHC picker, was usable on up to IHC 560. Cultivators were another product that had models made for use by other than JD. IHC cultivators on Ollie possible- the one Oliver that father had awhile "till older brother rolled it used many of the IHC stuff from the H and M and I think the 4 row cultivator for M was one piece that was mounted for summers corn and bean field use while M was used for belt use on grinder. RN
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
