Posted by dave2 on October 08, 2011 at 12:14:23 from (139.139.35.70):
Hey folks,
Sidewall on one of my wagons is about 4ft high. Climbed up the side and jumped onto the bed which was actually INTO the bed because I went thru the floor.... Needs replaced... This is a wagon that had horse poo stored on it til it was full then emptied. I'll be using it to clean stalls/paddocks but not leaving anything on it for more than a day. Wood part is 5'4" wide and 9' long with crossmembers 3'OC. Wood is T&G 4"x 3/4" ran lengthwise. Brainstorm today was deck boards made from recycled PVC (?) until I saw the price. Best deal I find is on douglas fir, larch, and spruce. Spruce is T&G, rest is normal boards. 3 wagons, one is the floor, another the same size is the floor and sides, and a bigger hay wagon is just the floor which will be 5'4" running across with 2 supports just under 2ft. Dont really want to fool with Oak so which of the wood I mentioned would be the best choice? All will be heavilly stained (treated).
douglas fir
larch (told NOT to treat the larch???)
spruce (T&G)
Larch is rough, rest is planed...
Thanks, Dave
This post was edited by dave2 at 12:27:59 10/08/11.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
