Posted by george md on October 28, 2011 at 21:09:33 from (209.213.167.201):
In Reply to: Cracked block posted by ridgelane on October 28, 2011 at 10:35:42:
Now that you have just about every ones majic hockempucky and all the ideas for the hot glue sticks, the one answer you got that is right is the lock n stitch . As one who fixes many things of cast iron , the best way to ruin what you have is to weld it with any kind of arc weld , boy do I ghet to undo a lot of damage. If you arc weld any on that crack , you have eliminated any chance of drilling for lacing plugs because the arc makes heat and with the cold iron around it, the surounding chills quickly and becomes like white cast and is almost tool steel hard ,will destroy drill bits.
The lock n stitch site has 4 pages on cast iron welding , read it and learn it , it is a crash course on cast iron welding that would take you many many years to learn by doing. Ask me how I know.
Below the photos is a link to more cast repair and the rest of the photos of the mianus exhaust manifold. It was made 1910 to 1915.
outer layer destroyed by rust and erosion and freezing
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.