Posted by Chris Jones on November 03, 2011 at 18:58:04 from (98.26.240.6):
Y'all might remember I bought a parts Wheel Horse recently basically for tires and wheels. Well, my prize is going sour. The front tires were mounted on nice rims with un-inflated tubes. When trying to inflate them one valve stem tried hard to draw itself inside the rim and the other pushed out and since it was a 90deg stem it pushed hard into the wheel till I had to pry it away with a screwdriver to deflate it again. I had the tires demounted and found the tubes have the wrong type stems. I got in the truck to go get new rims and something reminded me I'd never actually checked to see if the rims would fit the axle on my Wheel Horse or Cadet. So I did and it doesn't. The axle length on the donor was 4.5 inches and my Wheel Horse was 3.75 inches and the cadet 3 inches! Bummer. After some measuring I found out that my Wheel Horse rims were the same width despite looking larger. So I could take those tires off and put these tires on. Great! So my neighbor and I using a tire changer he has demounted the tires and then noticed how badly rusted inside the rims were and they'd actually lost so much strength the'd bent during the demounting process. So Now I need new rims. The problem is I'm now aware how many variables exist in rims. Width, axle length, axle diameter, how far in or out the wheel bearing sits inside the wheel. I'd like to find a place online where I could buy the wheels at a good price but I can't find a place that gives all the needed info to insure I get what I need. Any ideas where I could find them?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
