Posted by THaden on November 10, 2011 at 09:37:28 from (63.233.238.233):
This is our second year with this combine. Up til now it has been flawless. The problem is when you swing the auger out to unload, the unloading system binds up and squeels the belt and or breaks the shear bolt. The first time it happened i saw the pinion nut on the 90' bevel gears for the vertical auger, was loose- i tightened it and all worked for about 2 more times. Then same thing. Everything up to the bevel gear seems to be ok (we took chains off and checked as best we could with 200 bu of beans in it) We thought it was in the little gear box in the turret elbow. Took it out (that job sucks)but it was fine. We pulled the inspection cover off of the vertical auger housing to see if there was any thing jammed in there- no just beans coming out. Said heck with it and tried it again- it worked. For the rest of the day, when it came time to unload, just popped the cover off, let some beans out and it works. I believe the problem is in the vertical auger and we are going to tear it apart soon, but wanted to see if any one had been there and done that or has any ideas.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
