Posted by NCWayne on November 18, 2011 at 19:20:55 from (69.40.232.132):
In Reply to: Waste oil heat? posted by Row Crop on November 18, 2011 at 02:27:17:
Dad bought a Shenandoah brand about 12 years ago and other than routine maintenance he didn't have any major problems for nearly 8 of those years. By that time the burner was giving problems, the origional mfg wasn't in business anymore, so he went with a replacement burner unit from Clean Burn. Other than that I believe the only problems came from dirty oil which was taken care by installing a spin on filter past the pump instead of relying on the suction screen supplied with the furnace, and raising the suction tube up off the bottom of the tank about a foot to keep it from picking up water.
As far as the amount of oil you need, I think his was rated at 250,000 BTU and needed about .8 gallon per hour. We usually went through about 300-400 gallons a season keeping a 40x60, uninsulated shop, with a 12 foot ceiling, at a comfortable working temp of about 68 degrees.
Like others haves said these type furnaces have come along way in the past years and now are pretty reliable. Still, just like any other machine, the continued reliability will be tied directly to how commited you are to keeping it properly maintained. And with these furnaces if you don't maintain them they will not be reliable...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
