The solution to that is simple, put a leghold trap on the perimiter of the cage. As the killer paces around the outside, looking for a way in they get snapped in the trap. You go out at day break and pop it in the head with a .22 short. Move the cage farther down the field and reset trap. Lather, rince, repeat. Dont forget, put 1/4 inch mesh near where you put the trap or the chicken will reach out and get its neck caught. Same if you occationally have chickens fly out, you will catch chickens as they walk the perimeter trying to get back in with the others.
You can do something similar with larger digging killers. Predig or start a hole making it look like the animal can dig into the pen/coop then put a 220 or 330 conibear on the hole. If there is good smell of chicken in/through the hole, the killer wont be able to resist trying to go through the hole dispite the fresh smell of human. Basically you are making a bucket set around the coop or run designed to catch the digging type killers.
Killers that make a habit of comming to the coop every night are the easiest to catch. They are a little harder to get if they wait for the chickens to wander away from the coop to ambush.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
