Posted by TomA on December 22, 2011 at 09:32:15 from (76.9.65.34):
In Reply to: 30W versus 15W-40 oil posted by northvale on December 22, 2011 at 03:38:44:
Caterpillar called for 30W oil in the old ones that I have, Ford recommended 30W in the 6.9-7.3 IDI's. That is what I run in mine but the choice is easy because we never get temps below 30 here. When I got my '86' Dodge with the 318 I used 15-40 for a bit and noticed blowby so I run 30W in it too. Newer engines that call for multigrade I run 15-40.
I want to lubricate my engines with oil not polymers.
I was running Delo until they went to the LE oil. I switched to Rotella. Then I realized they are formulating these new oils for the new engines. Now I am using Supertech oil from Wal*Mart. I suspect this is the earlier formula that more closely matches the what older engines called for.
The 318 had a front seal leak for a long time, it has stopped now.
The biggest problem is the Supertech was $12 per 2 gallon, now it is up to $22.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
