Re: Welding Cast Iron

Posted by shawnspeed3 on June 06, 2007 at 10:00:59 from (198.208.251.24):

In Reply to: Welding Cast Iron posted by oldnnew on June 06, 2007 at 09:10:46:

you might want to get new from deere, irepaced a knotter a couple of years ago and it was pretty darn affordable considering it is green.....and it was also on a 14 t...knotter arm, bill hook , gears,and shim kit was a little over a hundered bucks.....cheap pice of mind that everyting will line up properly....Shawn....oh, you might want to consider braising as well , cast iron and nodular iron are a little more tolerant of them over stick welding....

Replies:

• Re: Welding Cast Iron David Snipes 10:42:16 06/06/07 (1)
  • Re: Welding Cast Iron dan hill 17:55:29 06/06/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]