Sounds like the camera operates on the same wireless frequency. If the camera has its own receiver that plug into the tv, then all you should have to do is log into your wireless router and change the channel of the frequecy. In the USA computer wireless is on 802.11a/b/g/n either 2.5 gHz or 5 gHz depending on how new the router is. The older wireless routers required you to select the channel it broadcasts on (1-11) to minimize interference. If you can figure out how to log into your wireless device and change the channel then it should solve the problem.
You might also try "search for wireless networks". Your computer may be logging into the TV system b/c it is closer and a stronger signal. Windows XP SP2 and newer allows you to change the order of precedence for wireless networks.
If neither of these work then you might need to upgrade the wireless router to get it into a different frequency domain. (the camera is probably 2.5 gHz where a new router would allow for 5 gHz or both)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
